Best Drill Guide for Straight Holes

While purchasing something new why you should buy the bad one that you regret later. In that case, we have listed Best Drill Guide for Straight Holes below which will help you choose right one. If you’re in hurry this is the Best Drill Guide for Straight Holes on Amazon

We spent 43 hours to find a best option for you and it’s a Drill Guide Jig Punch, which comes with all amazing features you ever want. It is the Best Drill Guide for Straight Holes available in the market today. However, if you don’t want to spend big amount on Drill Guide for Straight Holes, then you should go with The Original Cabinet Hardware which comes with all the basic options you could ever expect in Drill Guide for Straight Holes.

After a good research, we have sort listed Best Drill Guide for Straight Holes below.

Top 10 Best Drill Guide for Straight Holes In 2020

PRODUCT RATING PRICE
1 1

Drill Guide Jig Punch

Check On Amazon
2 2

The Original Cabinet Hardware

Check On Amazon
3 3

Big Gator Tools STD1000DGNP

Check On Amazon
4 4

Milescraft 1312 DrillBlock Handheld

Check On Amazon
5 5

DCT SAE Drill Bit

Check On Amazon
6 6

Drill Guide Dowel Kit

Check On Amazon
7 7

Cabinet Hardware Jig ESFORT

Check On Amazon
8 8

DRILAX Drill Bit Hole

Check On Amazon
9 9

Milescraft 1318 Drillmate Drill

Check On Amazon
10 10

wolfcraft 4525404 Muilt-Angle Drill

Check On Amazon

Top 10 Drill Guide for Straight Holes

Are you looking for top 10 Drill Guide for Straight Holes available right now in the market? Then check out below, we researched and short listed best one here.

1. Drill Guide Jig Punch

Features:

  • CONVENIENT STORAGE AND MOVABLE — When you are not using it, Cabinet pull drill guide can be disassembled into several separate parts, occupying a small space, can be stored anywhere, and is particularly convenient to carry. Cabinet pulls tool is suitable for many people and places. For example, woodworkers can make wooden products or kitchenware and furniture, etc., which can make you faster and more convenient in life.
  • QUICK EASY ADJUST — Adjustable punch locator can be arbitrarily set length, quickly determine the location, perfect measurement of the distance between the holes, repeated use of the cabinet drill guide will not have any impact.
  • SAVE YOUR TIME — You can set drill jig up in a short time. The bit enters the correct position, no deviation, no marking or clamping required. The power tool punch positioning fixture is designed with 5 mm hardened steel to help eliminate the borehole. You can use drill guide jig without professional help. Drawer pull guide helps you reduce your hardware installation time by at least 80%.
  • BEST SERVICE — If you receive our cabinet handle jig, you can contact us if you have any questions. We will provide the best service, in case of any problem, we will refund 100%.
  • 2. The Original Cabinet Hardware

    Features:

  • PRECISION YOU NEED – The most accurate and versatile cabinet hardware jig on the market. Precision machined to ±0.0002” tolerance then hand-calibrated to .001” square with US forged aircraft grade aluminum that is 3x harder than that of our top competitors, no plastic components that break or quickly wear out, laser engraved rulers won’t fade with time. Our case-hardened steel bushings are engineered to last more than 10,000 holes and backed by our lifetime warranty.
  • FAST AND EASY TO USE – Install hardware 10x faster with the speed and ease of our jig. Our adjustable and reversable drill template takes the stress out of adding hardware to your cabinets. Versatile design even lets you quickly drill shelf pin holes and mounts hinge plates.
  • AVOID COSTLY MISTAKES – No re-do’s. No do-over’s. Cabinets are an investment that need to be protected in each and every step of their creation and install. This is why we use only the highest quality materials and spent 25 years testing and refining the TP-1934 Cabinet Hardware Jig. Developed and machined with an unmatched precision, durability and versatility, in order to prevent costly mistakes and ensure perfect installation of hardware every time.
  • LIFETIME WARRANTY – True Position is the top rated and trusted jig by professionals for over 25 years. Family-owned & operated, we build tools that stand up to the daily use of a professional and maintain the precision needed to ensure the job is done right. We offer a lifetime bushing warranty and free replacement for 60 days if the jig is not absolutely perfect. Proudly made in the USA for over two decades.
  • 3. Big Gator Tools STD1000DGNP

    Portable Drill Guide for 17 standard drill sizes: (1/8” to 3/8” in 1/64” increments) Covers all the drill sizes in a standard 3/8 drill index except drill sizes smaller than 1/8”.

    Features:

  • Use on flat surfaces, round parts, and corners
  • Special nickel alloyed steel heat treated for durability
  • Non-plated material with light oil coating to prevent rust
  • Alignment marks on guide to line up on center
  • 4. Milescraft 1312 DrillBlock Handheld

    Drill straight holes every time.

    Features:

  • Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces
  • The two product v-grooves allow for usage on corners and even cylindrical surfaces too
  • Package dimensions:3.05″L x 5.33″W x 14.48″H
  • 5. DCT SAE Drill Bit

    Features:

  • DRILL ANY SHAPE BOARD: Drill perfectly straight holes through even the thickest board no matter what the shape of the piece being drilled; Drill on sides, edges, spheres, and cylinders; For spheres, use disc-shaped recess on bottom of drill guide; For cylinders and edges (especially drilling pipe and dowels), use V-shaped groove on bottom of drill guide to position drill guide
  • QUICKLY FIND CENTER: Drop the included locating center punch pin inside the 3/16-inch bushing (one way fit – flat top of pin first into bottom of bushing – do not attempt pointed tip end into bushing) and then center over the spot to drill; To find the center line on an edge, place 2 small nails (not included) in drill guide holes and turn drill guide so each nail touches opposite side of the wood
  • VARIETY OF SAE SIZES: Standard (SAE) drill bushing sizes include 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, and 1/2” inch; Each drill bushing has permanently laser-etched size markings for quick identification
  • CONTENTS: Package includes (1) guide, (1) locating pin, and (6) standard drill bushings for your convenience
  • 6. Drill Guide Dowel Kit

    Drill perpendicular holes on flat edges, spheres, cylinders and corners every time with this Drill Guide Kit.

    Features:

  • 3″ see-through square base
  • Includes bushing sizes 3/16”, 1/4”, 5/16”, 3/8”, 7/16 and 1/2″
  • Includes centering pins
  • 7. Cabinet Hardware Jig ESFORT

    Features:

  • 【High precision】This punch locator lets you measure out the perfect hole position. The hardware jig allows you to drill directly through it without the need for clamps or marking hole locations. This ensures fast and accurate drill guide.
  • 【Easy to use & Save time 】The cabinet drill template can be set up in a minute. The front-mounted clamp handle makes clamping easy. Our cabinet door handle jig provides you with accurate measurements and also save your time.
  • 【Detachable & Portable】Our cabinet jig can be split into small parts. It is convenient to carry with our portable tool storage bag.
  • 【Wide application】The multifunction cabinet handle template is perfect for precise installation of cabinet hardware handles, drawer pulls and knobs.
  • 8. DRILAX Drill Bit Hole

    Features:

  • Adjustable Plate for All Sizes of Hole Saws up to 3-1/4″ Drill Diameters – Dual Side Plate
  • Removable Ball Bearings – Infinite Configurations – Flip the Plate for Larger Sizes up to 3-1/4″
  • You Can Use the Guide to Start the Hole and Remove the Guide for the Remainder of the Holes
  • Secure The Guide with Suction Base – Feed Water through the Integrated Hole
  • 9. Milescraft 1318 Drillmate Drill

    Drill straight holes all the time! With the DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock.

    Features:

  • Attaches to all 3/8″ And 1/2″ Power drills and it also includes a 3/8″ Capacity chuck with key
  • Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
  • Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
  • Adjustable depth stop and spring action control of the head
  • 10. wolfcraft 4525404 Muilt-Angle Drill

    The Wolfcraft Drill Guide can be used in horizontal, vertical or angle positions, and fits all 1/4-inch or 3/8-inch drills.

    Features:

  • Guide-bars themselves have springs for a quick return when doing repetitive drilling
  • Drill adapter itself slides up and down on guide-bars
  • Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place
  • Fits all 1/4-inch or 3/8-inch drills
  • Conclusion

    We did good research to find out top 10 Best Drill Guide for Straight Holes to buy in 2020. For more similar product reviews, check out below or visit here.