Best Oil Extractor for Cars

We specially wrote this article on Best Oil Extractor for Cars to help you out. As you know there are many products available in different price range and features, it’s makes confuse to anyone while choosing best one. Hovever, if you’re in hurry this is the Best Oil Extractor for Cars on Amazon

We spent 28 hours to find a best option for you and it’s a Fluid Extractor Manual 7-12, which comes with all amazing features you ever want. It is the Best Oil Extractor for Cars available in the market today. However, if you don’t want to spend big amount on Oil Extractor for Cars, then you should go with OEM TOOLS 24389 Manual which comes with all the basic options you could ever expect in Oil Extractor for Cars.

After a good research, we have sort listed Best Oil Extractor for Cars below.

Top 10 Best Oil Extractor for Cars In 2020

1 1

Fluid Extractor Manual 7-12

Check On Amazon
2 2

OEM TOOLS 24389 Manual

Check On Amazon
3 3

Mityvac 7201 Fluid Evacuator

Check On Amazon
4 4

HORUSDY 200cc Fluid Extractor

Check On Amazon
5 5

ALEKO OEXP02 1.6 Liter

Check On Amazon
6 6

Air Power America 5060TS

Check On Amazon
7 7

Performance Tool W54170 12V

Check On Amazon
8 8

12V 60W Vacuum Transfer

Check On Amazon
9 9

Oil Change Pump Extractor

Check On Amazon
10 10

Electric Portable DC 12V

Check On Amazon

Top 10 Oil Extractor for Cars

Are you looking for top 10 Oil Extractor for Cars available right now in the market? Then check out below, we researched and short listed best one here.

1. Fluid Extractor Manual 7-12

Fluid Extractor, Manual, Length (In.


  • Country of manufacture: Taiwan
  • Manufacturer: MITYVAC
  • 2. OEM TOOLS 24389 Manual

    EASY TO USE: The OEMTOOLS 24389 5.


  • VERSATILE APPLICATIONS: Extracts oil, power steering fluid and low-viscosity fluids, such as water and coolant.
  • EASY-TO-USE: Includes 5 feet of flex hose and (2) specialized dipstick adapters to extract fluids directly from the dipstick tube.
  • MINIMIZE CLEAN-UP TIME: 1.4 Gallon fluid reservoir features a dependable single-piece construction to drastically reduce oil and fluid spills during fluid maintenance jobs.
  • OVERFLOW PROTECTION: Shut-off valve prevents fluids from overflowing.
  • 3. Mityvac 7201 Fluid Evacuator

    Fluid Evacuator/Dispenser, Manual, Width 12.


  • Clean and simple way to evacuate and dispense fluids
  • Reservoir is constructed of durable polyethylene and will not rust or corrode
  • Automatic flow control valve prevents the unit from overfilling during use and automatically shuts off at 8 liters
  • Features 0.23″ OD x 5′ long (5.7 mm OD x 1.5 m long) dipstick tube, 0.26″ OD x 5′ long (6.6 mm OD x 1.5 m long) dipstick tube, 0.41″ OD x 5′ long (10 mm OD x 1.5 m long) main evacuation tube
  • 4. HORUSDY 200cc Fluid Extractor


  • Ideal for Extracting or Changing Engine Oils or Lubricants in ATV’s, Boats, Farm Equipment, Industrial Gear Boxes, Motor Vehicles, Motor Bikes, RV’s, etc.
  • Excellent for use with Oil, Coolant and Hydraulic Systems Durable, Oil and Chemical-Resistant Polypropylene Construction
  • Features Heavy-Duty Construction Allows for Strength and Durability
  • Features Double Seals for Brake and Anti-Freeze, Assembled on Plunger
  • 5. ALEKO OEXP02 1.6 Liter

    Our oil and fluid extractor pump makes it quick, easy and clean to pump oil and other automotive fluids out of engines, transmissions, radiators and more.


  • Perfect for draining motor oil, transmission fluid, coolant, brake fluid, gear lube, etc
  • Includes 1.6 liter tank, 52 and 53 inch hose, suction lock, hand pump and funnel
  • Ideal for automotive vehicles, watercraft, ATV/motorcycles, farm equipment, lawn equipment, household
  • Securely stores used fluid for transport or disposal
  • 6. Air Power America 5060TS

    The Topsider’s reliability and convenience has long been trusted by boaters for easy, no mess oil changes, and other marine and automotive maintenance applications.


  • Quickly extracts old oil through the dipstick tube into the 8 quart container
  • Wide 12 inch diameter stance provides a stable base – eliminating any potential spills
  • Portable – easy to operate in confined spaces
  • No mess from spills or inconvenient drain plugs – used oil and other liquids are stored safely for proper disposal
  • 7. Performance Tool W54170 12V

    12V Oil Extraction Pump.


  • Efficiently remove up to 3 quarts per minute
  • Easily removes oil from cars, motorcycles, RVs, boats and so much more
  • Self priming 12v 5 amp DC pump
  • Approximately speed 1400 RPM
  • 8. 12V 60W Vacuum Transfer

    Specification: Rated Voltage: DC 12V Rated Power: 60W Maximum Flow: 5L/min Maximum Pressure: 0.


  • Maximum Pressure: Max. 0.8MPA,Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V
  • Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries
  • Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump
  • 9. Oil Change Pump Extractor



  • ENGINE OIL CHANGE MADE EASY! – The 12v oil extractor pump are very easy to use and makes a top down oil change so easy. Pumps oil out throw dip stick, no need to lay under your car. Ideal oil change pump extractor equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use. Great for a quick oil change.
  • FOR DIFFERENTIAL FLUID AND TRANSMISSION FLUID – This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
  • PROFESSIONAL OIL CLEANING TOOL – The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc). Suitable for extracting oil, diesel etc from a vehicle, (never use for petrol), greatly to help your oil-cleaning task, saving time.
  • 100% CUSTOMER SATISFACTION GUARANTEED – 1MANNEW OIL CHANGE PUMP EXTRACTOR – 12 Volt / 5 Amp DC Motor.Ideal Transfer Pump for your quick and clean oil-changes.The oil will simply draw out the motor through the oil dipstick bore; If you are not satisfied with engine oil extractor pump, feel free to contact us for solutions.
  • 10. Electric Portable DC 12V

    Specification: Material: Metal& Plastic Rated Voltage: DC 12V, Rated Power: 60W, Maximum Pressure: Max.


  • Portable for travel, Small size, DC 12V If you want to connect this pump to AC power, you will need a power converter
  • Maximum Pressure: Max. 0.8MPA,Maximum Flow: 4L/min, Rated Power: 60W
  • Pump Diameter: Approx. 4.5cm(1-3/4″), Cable Length: Approx. 70cm(27-1/2″ ), Clips Length: Approx. 8cm(3-1/8″)
  • Package includes: 1x Oil Pump, 1x 11mm outlet pipe, 1x 5mm Brass Pipe, 1x 6mm Nylon Pipe, 1x Manual
  • Conclusion

    We did good research to find out top 10 Best Oil Extractor for Cars to buy in 2020. For more similar product reviews, check out below or visit here.