Best Sump Pump for Hot Tubs

Looking for Best Sump Pump for Hot Tubs that can run last long? Well, we have listed Best Sump Pump for Hot Tubs below and you should buy it without any second thought. In case, if you’re in hurry this is the Best Sump Pump for Hot Tubs on Amazon

We spent 26 hours to find a best option for you and it’s a Superior Pump 92341 13, which comes with all amazing features you ever want. It is the Best Sump Pump for Hot Tubs available in the market today. However, if you don’t want to spend big amount on Sump Pump for Hot Tubs, then you should go with WAYNE CDU790 13 HP which comes with all the basic options you could ever expect in Sump Pump for Hot Tubs.

After a good research, we have sort listed Best Sump Pump for Hot Tubs below.

Top 10 Best Sump Pump for Hot Tubs In 2021

1 1

Superior Pump 92341 13

Check On Amazon
2 2


Check On Amazon
3 3

WAYNE WWB WaterBUG Submersible

Check On Amazon
4 4


Check On Amazon
5 5

FLUENTPOWER Submersible Pump 34HP

Check On Amazon
6 6

Green Expert 203618 14HP

Check On Amazon
7 7


Check On Amazon
8 8

Yescom 12 HP 2113GPH

Check On Amazon
9 9

SumpMarine UTP 115-Volt 330

Check On Amazon
10 10

Wayne VIP50 12 HP

Check On Amazon

Top 10 Sump Pump for Hot Tubs

Are you looking for top 10 Sump Pump for Hot Tubs available right now in the market? Then check out below, we researched and short listed best one here.

1. Superior Pump 92341 13

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested.


  • Rugged cast iron construction; 10-foot cord length
  • Vertical float switch to automatically turn the pump on/off. Switch on and off point is 6 and 2 inches
  • 1-1/2 inch NPT discharge for high capacity pumping
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
  • 2. WAYNE CDU790 13 HP

    1/3 hp cast iron submersible sump pump with vertical switch pumps up to 4600 gph at 0′ designed for 11 inch diameter or larger sump basin top suction design filters debris and minimizes clogging designed for easy installation without any Plumbing changes epoxy coated steel high performance 1/3 hp motor 1-1/2 inch NPT discharge & durable cast iron base easy carry handle for portability float guard protects switch from hang ups Easy installation and easy handling.


  • Cast iron pump housing for durability
  • Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
  • Top suction strainer filters debris and protects pump from clogging
  • High capacity 1-1/2″ npt discharge
  • High performance; max. flow rate is 4600 Gallons Per Hour; 3060 GPH at 10 ft. of discharge lift
  • 8 ft Water Resisitant Power Cord provides easy access to nearby GFCI protected outlet
  • 3. WAYNE WWB WaterBUG Submersible

    Top discharge is perfect for tight spaces where water removal is needed laundry tubs, window wells, buckets, bathtubs, etc.


  • Assembled in the US with foreign and domestic parts
  • Multi-flo technology allows easy selection of the appropriate discharge for the application
  • Top discharge is perfect for tight spaces where water removal is needed; window wells, buckets, etc.
  • Side discharge is ideal for easy water removal from flat open surfaces: flat roofs, flooded basements, standing water in yard, shower stalls, etc
  • 30 ft. Max head.; removes water down to 1/16 in. Of surface, virtually dry. For removing water from flooded basements, boats, stock tanks, and even a 5 gallon bucket
  • Max. Flow rate is 1257 gallons per hour: 900 gph at 10 ft; 3/4 in. Corrosion Resistant Brass discharge outlets, with tethered cap seals, fits any standard garden hose
  • Eliminate standing water in your yard, and the risk to attract mosquitos. Use the WaterBUG to stop the bugs!
  • 4. WAYNE CDU980E 34 HP

    The Wayne CDU980E submersible sump pump can move up to 5490 gallons per hour (gph).


  • Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit.Assembled in us, with foreign and domestic components
  • Stainless steel motor housing and rugged, cast iron pump base
  • Vertical float switch, tested to 1 million cycles!4600 GPH at 10 ft. of discharge lift
  • 1-1/2 In. NPT Discharge for compliance with building codes
  • 5. FLUENTPOWER Submersible Pump 34HP


  • ?【AUTOMATIC FLOAT SWITCH】- Adjust float switch cable length to set pump automatic running by sensing the position of water level. Float switch is also can be disabled by attaching it on the side slot, then pump works manually control. The good thing is pump can drain water as low as possible by manually control(4cm).
  • ?【STABLE PERFORMANCE】- Maximum flow rate 3300GPH and Max lift water up to 26ft, it can be installed for emergency use and also daily application.
  • ?【SMALL DIRT PASSAGER】- Base filter design allows to pass up to 25mm solids and removes water down to 4cm.
  • ?【CABLE BRACKET DESIGN】- Pump comes with 8m cable, Its handle bracket is very helpful to storage it and give you clean space at your home. The packing included pump, hose adapter, handle and instruction manual.
  • 6. Green Expert 203618 14HP

    Product DetailsGreen expert 1/4 HP submersible utility pump can be adapted to connect with 3/4″ standard garden hose, can be submersed in 20 feet depth Flooded Basement or Puddle of Accumulated Water for water removal.


  • ☘【Simple Plug-in Operation】- The pump will be directly running when power on, can remove water level down to 0.2”. Designed for quick water draining in flooded area, water tanks, swimming pools, basement, hot tub or garden pond etc. You can use it with our garden hose nozzle for car wash, Plants watering, pets shower as well.
  • ☘【Easy to Carry&Install】- Item weight: 8.3lb. The 25 feet long grounded waterproof cord with portable handle allows convenient installation from farther position, no more trouble for dealing with extension cords! Discharge Fittings: 2 *plastic adapters, 1-1/4 inch for high capacity pumping and 3/4 inch for connecting to standard garden hoses.
  • ☘【Green and Tough Design】- Environmental and ergonomics appearance can comfortably fit in your house and garden, quiet running. Full corrosion-resistant and reinforced thermoplastic construction with thermal overload protection for continuous duty use in water removal application.
  • ☘【Safety Ensure and Customer First】- Passed by UL certification with 100% manufacturer tested. For any question, please don’t hesitate to write to us through our storefront and click “ask a question”, or support email to us, we will respond within 24 hours.
  • 7. WAYNE RUP160 16 HP

    This Wayne Thermoplastic Submersible Utility Pump drains flooded basements, empties water-filled boats and removes water from stock tanks and flat roofs with its 1/6 HP motor.


  • Removes water within 3/8 inch of surface
  • Pumps up to 3,000 gallons per hour
  • 1-year limited warranty
  • Designed To Perform In Applications Such As, Draining Flooded Basements, Emptying Water Filled Boats, And Removing Water From Sinks, Stock Tanks And Flat Roofs
  • Designed for continuous duty operations
  • 1-1/4 in. discharge with 3/4 in. garden hose adapter
  • 8. Yescom 12 HP 2113GPH


  • SAFE USE: Built-in automatic power shut off mechanism by auto float switch for preventing the coil from getting burned when pump fails to pump water
  • DURABLE & STURDY: Heavy duty engineered Resin Construction for long serving time under water, can prolong this submersible pumps life expectancy
  • 1/2 HP WATER PUMP: Powered by a durable oil-cooled electric motor,runs, H.Max: 16 5/12 ft, draining 2113 gallon per hour quickly
  • WIDE APPLICATION: Ideal for handling such tasks as draining water from a basement or a shallow flooded area, draining or refilling your swimming pool, pond or simply a bath tub, great for household or utility use, such as swimming pools, cellars, garden pond or flooded road
  • 9. SumpMarine UTP 115-Volt 330

    The Utility Transfer Pump from SumpMarine is a 1/10th HP multi purpose transfer pump capable of transferring up to 330 Gallons per hour.


  • Made of durable material with Metal hose connectors for higher reliability than plastic threads
  • Light weight and portable. Fill pump with water, connect hoses, plug in and you’re ready to go
  • Perfect for household and utility applications of transferring water from one place to another
  • Includes 6′ hose and Water Suction attachment as well as an impeller replacement kit
  • 10. Wayne VIP50 12 HP

    1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0′, corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability.


  • The product is highly durable and easy to use
  • Easy installation and easy handling
  • Requires 2 5/8 inch of water to prime
  • Conclusion

    We did good research to find out top 10 Best Sump Pump for Hot Tubs to buy in 2021. For more similar product reviews, check out below or visit here.